Gas gun ramp loading of Kel-F 81 targets using a ceramic graded areal density flyer system

Kel-F 81 (PCTFE/Polychlorotrifluoroethylene) polymer targets were subjected to ramp loadings generated by a ceramic flyer accelerated into the targets by a gas gun in the plate impact configuration. This approach used a ceramic graded areal density flyer in conjunction with a ceramic buffer plate to induce a ramp loading in the target. The flyer was comprised of a rapid prototyped alumina ceramic. The loading was observed with embedded electromagnetic particle velocity gauges (PV gauges) with the results compared with ANSYS Autodyn™ hydrocode simulations. Experimental results show that ramp loadings of varying duration and magnitude were induced into the target. These loadings can be described as shockless compressions leading to shocked states within the material. In addition, numerical simulations provided further insight into the loading approach – with good agreement found with experimental data, opening the potential to design more complex loading systems in future

On differences in the equation-of-state for a selection of seven representative mammalian tissue analogue materials

Tissue analogues employed for ballistic purposes are often monolithic in nature, e.g. ballistic gelatin and soap, etc. However, such constructs are not representative of real-world biological systems. Further, ethical considerations limit the ability to test with real-world tissues. This means that availability and understanding of accurate tissue simulants is of key importance. Here, the shock response of a wide range of ballistic simulants (ranging from dermal (protective / bulk) through to skeletal simulant materials) determined via plate-impact experiments are discussed, with a particular focus on the classification of the behaviour of differing simulants into groups that exhibit a similar response under high strain-rate loading. Resultant Hugoniot equation-of-state data (Us-up; P-v) provides appropriate feedstock materials data for future hydrocode simulations of ballistic impact events

The Enthusiast’s Eye: The Value of Unsanctioned Knowledge in Design Historical Scholarship

If design history research relies solely on institutionalized documentation and academic scholarship – that is, sanctioned knowledge – not only will its purview be limited to a very narrow segment of design culture, it will also lose out on a vast array of sources to valuable knowledge about our material environment produced by amateurs, collectors, and enthusiasts – what we in this article define as “unsanctioned knowledge.” Because of its dissociation with professional institutions and academic protocols and their – albeit admittedly utopian, but nonetheless upheld – ideals of objectivity, this type of knowledge is typically considered fundamentally subjective in nature and therefore of little or no relevance and value to academic scholarship. In this article, we argue that, to the contrary, design historical scholarship has much to gain from engaging more seriously with the unsanctioned knowledge represented by the enthusiast's eye

Effects of impactor shape on the deformation and energy absorption of closed cell aluminium foams under low velocity impact

The low-velocity impact response of closed-cell aluminium foams using various shaped indenters has been investigated. Impact tests were conducted using an instrumented drop-tower with flat, hemispherical, conical and truncated-conical indenter at impact energies ranging from 46.8 J to 105 J. The effects of variation of indenter shape and impact velocity on mechanical properties and deformation mechanisms of foam have been explicitly investigated. The results show that the mechanical response of closed-cell aluminium foams under low-velocity projectile impact significantly depends on the indenters' nose shape and initial impact energy. The deformation mechanisms of foam for different shaped indenters have been elucidated using reconstructed X-ray microcomputed tomography (XCT) images of the indented specimens. A good correlation between the indenter shape and deformation mechanisms has been observed. The structure-property relations of foams during dynamic indentation have also been explored by analysing the XCT images of the indented specimens. The parameters that influence the energy absorption capacity of the material are also presented.The authors gratefully acknowledge UNSW Canberra's Defence Re- lated Research program that part-funded this work. M.A. Islam also likes to thank M. Turner, L. Beachin and J. Middleton for their technical sup- port in X-ray image analysis in the Department of Applied Mathematics, The Australian National University, Canberra, Australia

Treatment response and remission in a double-blind, randomized, head-to-head study of lisdexamfetamine dimesylate and atomoxetine in children and adolescents with attention-deficit hyperactivity disorder

The Author(s) 2014. This article is published with open access at Springerlink.com Objectives A secondary objective of this head-to-head study of lisdexamfetamine dimesylate (LDX) and ato-moxetine (ATX) was to assess treatment response rates in children and adolescents with attention-deficit hyperactiv-ity disorder (ADHD) and an inadequate response to methylphenidate (MPH). The primary efficacy and safety outcomes of the study, SPD489-317 (ClinicalTrials.gov NCT01106430), have been published previously. Methods In this 9-week, double-blind, active-controlled study, patients aged 6–17 years with a previous inadequate response to MPH were randomized (1:1) to dose-optimized LDX (30, 50 or 70 mg/day) or ATX (patients \70 kg: 0.5–1.2 mg/kg/day, not to exceed 1.4 mg/kg/day; patients C70 kg: 40, 80 or 100 mg/day). Treatment response was a secondary efficacy outcome and was predefined as a reduction from baseline in ADHD Rating Scale IV (ADHD-RS-IV) total score of at least 25, 30 or 50 %. Sustained response was predefined as a reduction from baseline in ADHD-RS-IV total score (C25, C30 or C50 %) or a Clinical Global Impressions (CGI)–Improvement (CGI–I) score of 1 or 2 throughout weeks 4–9. CGI– Severity (CGI–S) scores were also assessed, as an indicator of remission. Results A total of 267 patients were enrolled (LDX, n = 133; ATX, n = 134) and 200 completed the study (LDX, n = 99; ATX, n = 101). By week 9, significantly (p \ 0.01) greater proportions of patients receiving LDX than ATX met the response criteria of a reduction from baseline in ADHD-RS-IV total score of at least 25 % (90.5 vs. 76.7 %), 30 % (88.1 vs. 73.7 %) or 50 % (73.0 vs. 50.4 %). Sustained response rates were also signifi-cantly (p \ 0.05) higher among LDX-treated patient

Dynamic Crushing Response of Closed-cell Aluminium Foams during Shock Loading

Understanding the impact response of aluminium foams is essential for assessing their energy absorption capacity under dynamic loading. In this paper, the dynamic compaction behavior of closed-cell aluminium foam (CYMAT ™) has been tested using the plate-impact technique. Post-impacted samples have been examined using optical microscopy to observe the microstructural changes with the objective of elucidating the pore-collapse mechanism.The authors also gratefully acknowledge UNSW Canberra’s Defence Related Research program that part-funded this work

Studies of black diamond as an antibacterial surface for gram negative bacteria: the interplay between chemical and mechanical bactericidal activity

‘Black silicon’ (bSi) samples with surfaces covered in nanoneedles of length ~5 μm were fabricated using a plasma etching process and then coated with a conformal uniform layer of diamond using hot filament chemical vapour deposition to produce ‘black diamond’ (bD) nanostructures. The diamond needles were then chemically terminated with H, O, NH2 or F using plasma treatment, and the hydrophilicity of the resulting surfaces were assessed using water droplet contact-angle measurements, and scaled in the order O > H ≈NH2 >F, with the F-terminated surface being superhydrophobic. The effectiveness of these differently terminated bD needles in killing the Gram-negative bacterium E. coli was semiquantified by Live/Dead staining and fluorescence microscopy, and visualised by environmental scanning electron microscopy. The total number of adhered bacteria was consistent for all the nanostructured bD surfaces at around 50% of the value for the flat diamond control. This, combined with a chemical bactericidal effect of 20–30%, shows that the nanostructured bD surfaces supported significantly fewer viable E. coli than flat surfaces. Moreover, the bD surfaces were particularly effective at preventing the establishment of bacterial aggregates – a precursor to biofilm formation. The percentage of dead bacteria also decreased as a function of hydrophilicity. These results are consistent with a predominantly mechanical mechanism for bacteria death based on the stretching and disruption of the cell membrane, combined with an additional effect from the chemical nature of the surface

Spatial scaling of plant and bird diversity from 50 to 10,000 ha in a lowland tropical rainforest

While there are numerous studies of diversity patterns both within local communities and at regional scales, the intermediate scale of tens to thousands of km2 is often neglected. Here we present detailed local data on plant communities (using 20 × 20 m plots) and bird communities (using point counts) for a 50 ha ForestGEO plot in lowland rainforest at Wanang, Papua New Guinea. We compare these local diversity patterns with those documented in the surrounding 10,000 ha of lowland rainforest. Woody plant species richness was lower within 50 ha (88% of 10,000 ha richness), even when both were surveyed with identical sampling effort. In contrast, bird communities exhibited identical species accumulation patterns at both spatial scales. Similarity in species composition (Chao-Jaccard) remained constant while similarity in dominance structure (Bray–Curtis) decreased with increased distance between samples across the range from < 1 to 13.8 km for both plant and bird communities. The similarity decay was more rapid in plants, but in both cases was slow. The results indicate low to zero beta-diversity at the spatial scale represented here, particularly for birds but also for woody plants. A 50 ha plot provided a highly accurate representation of broader-scale diversity and community composition within 10,000 ha for birds, and a relatively good representation for woody plants. This suggests potential for wider generalization of data from ForestGEO plots which are almost always locally unreplicated, at least for those in lowland tropical forest

What is the 'dominant model' of British policymaking? Comparing majoritarian and policy community ideas

The aim of this article is to help identify the fundamental characteristics of the British policymaking system. It highlights an enduring conflict of interpretation within the literature. On the one hand, most contemporary analysts argue that the ‘Westminster model' is outmoded and that it has been replaced by modern understandings based on ‘governance'. On the other, key ideas associated with the Westminster model, regarding majoritarian government and policy imposition, are still in good currency in the academic literature, which holds firm to Lijphart's description of the United Kingdom as a majoritarian democracy. These very different understandings of British government are both commonly cited, but without much recognition that their conclusions may be mutually incompatible. To address this lack of comparison of competing narratives, the article outlines two main approaches to describe and explain the ‘characteristic and durable' ways of doing things in Britain: the ‘policy styles' literature initiated by Richardson in Policy Styles in Western Europe and the Lijphart account found in Democracies and revised in 1999 as Patterns of Democracy. The article encourages scholars to reject an appealing compromise between majoritarian and governance accounts